Wholesale Spike Drive Anchors / Strike Anchor Bolts | Factory Direct
A Spike Drive Anchor—also widely referred to as a Strike Anchor Bolt, hammer-set anchor, or heavy-duty drive nail anchor—is a premium one-piece mechanical fastener designed for instant, high-strength expansion. Instead of using a wrench, it triggers its expansion mechanism simply by hammering the pin or the pre-expanded body into pre-drilled holes. It is specially engineered for reliable structural fastening in hard substrates such as concrete, solid blocks, and heavy brick masonry.
T&Y Hardware Industry specializes in the precision manufacturing of high-performance spike drive anchor series. Utilizing top-grade carbon and stainless steel for professional forging, our fasteners strictly adhere to global dimensional standards (including metric and fractional sizes). From complete heavy-duty anchoring systems to matching bolts, nuts, and washers, T&Y delivers factory-direct quality assurance and optimized wholesale tier-pricing for bulk commercial buyers worldwide.
Spike & Strike Drive Anchor Material Specifications
We can provide you with spike drive anchor products in a variety of materials, including standard specifications of stainless steel, carbon steel, and nylon materials in stock. In addition, in order to meet the needs of special application scenarios, we also support the customization of brass, aluminum, titanium alloy, and other materials. Customized production.
In terms of specifications, customers can not only choose industry-standard sizes but also provide exclusive size customization services according to specific engineering requirements. You are welcome to inquire about specific needs at any time.
Stainless Steel Drive Pin Anchor
Carbon Steel Zinc Drive Nail Anchors
Wall Nylon Cross Drive Anchor
Specialized Drive Anchor Types
In addition to the common hammer anchors, we also provide more options such as pre-expanded Crimp Drive Anchors, split Split Drive Anchors, and hollow Drive Anchors to meet the installation needs of different scenarios.
Nail in Hammer Drive AnchorOther name： nail drive anchor , nail anchors for drywall
Size：M6, M8, 1/4 in, 3/16 in
Hammer Drive Pin AnchorsOther name： hammer drive pin anchor, pin drive anchors
Size：M6, M8, 1/4 in, 3/16 in
Types： Flat head， mushroom head
Size: 1/4 in, 3/8 in, 3/16 in
Types： Countersunk head， round head
Size: 1/4 in, 3/8 in, 3/16 in
How To Install Hammer Drive Anchors?
Steps for installing hammer pin anchors
- Drilling: First use an electric drill to drill a hole smaller than the diameter of the Hammer Drive Anchor, and clean up the internal debris.
- Insert the spike anchor bolt: Insert the hammer pin anchor through the workpiece to be fixed and insert it into the pre-drilled hole. It must be perpendicular to the wall, and be careful not to install it crooked.
- Hammer the anchor bolt: Hit the nail to the bottom with a hammer, check whether it can be shaken, and ensure that the expansion pipe is tightly attached to the hole wall.
- Fasten the pin anchor bolt: If it is a hammer anchor with a nut, you can install the fixed accessories and tighten it with nuts after fixing it.
- Customer feedback
- Our various certificates
- Our Advantages
- Material
- Surface preparation
Carbon Steel：Q345 (16Mn)25#,35#,45#
Stainless Steel: SS202、SS304、SS316、SS410、SS420、SS430
Duplex stainless steel : S32750、S32760、S2205、S2507
Alloy steel: Inconel 600、 Inconel 625 、Inconel 718 、 Monel 400、 K500
Aluminum, titanium alloy, and brass
polishing, blackening, blue-white zinc, zinc-nickel alloy, passivation, Dacromet, blackening, galvanized, Heat treatment
Related Product
Once the hammer drive anchor is installed, it is difficult to remove. If it is forcibly taken out, it will inevitably destroy the wall structure and leave damage in the pre-drilled hole.
When the construction requirement is only to ensure the smoothness of the wall, the better way to deal with it is to directly use the angle grinder to flatten the spike drive anchor. If there is a small amount of protruding residual part, it can be completely embedded in the hole by hammering, which can not only keep the wall beautiful, but also minimize the damage to the wall.
Our main customers are from Europe, South And North America, Southeast Asia
30% value of T/T in advance and other 70% balance on B/L copy.
For small order less than 1000USD, would suggest you pay 100% in advance to reduce the bank charges.
For low-carbon steel nail anchors, our processing time is 10-15 days, while for class 8.8 or 10.9, it will take 15-20 days based on your drive anchor requirement
English 
Spanish 
Arabic 
Russian 
Portuguese