• D-Head Bolts & Special Industries Screw (1)
  • D-Head Bolts & Special Industries Screw
  • D-Head Bolts & Special Industries Screw
  • D-Head Bolts & Special Industries Screw
  • D-Head Bolts & Special Industries Screw
  • D-Head Bolts & Special Industries Screw
  • D-Head Bolts & Special Industries Screw (1)
  • D-Head Bolts & Special Industries Screw
  • D-Head Bolts & Special Industries Screw
  • D-Head Bolts & Special Industries Screw
  • D-Head Bolts & Special Industries Screw
  • D-Head Bolts & Special Industries Screw

D-Head Bolts & Special Industries Screw

  • Factory Direct Supply: 100% production based on your drawings or samples with competitive wholesale pricing.
  • Material Options: Carbon Steel (Class 4.8, 8.8, 10.9, 12.9), Stainless Steel (SS304, SS316), and Brass.
  • Surface Coating: Plain, Zinc Plated (White/Yellow/Black), HDG, Black Oxide, and Geomet.
  • Reliable Supplier: 100% thread gauge testing and material test certificates (MTC) provided by تي اند واي.

Custom High-grade Non-standard Fasteners D Head Bolt

The D-head bolts are non-standard fasteners designed for tight spaces and high-vibration applications. The D-shaped head provides a mechanical flat that locks into place to prevent the bolt from rotating. This feature makes them widely used in automotive and heavy machinery, especially for securing gearboxes, transmissions, and drive shaft assemblies. We also offer D-ring variants for lifting and tie-down anchoring.

As a direct manufacturer, T&Y produces these special-shaped bolts according to your specific technical drawings or samples. We support custom production across a full range of materials (including carbon steel, stainless steel, and brass), metric or imperial thread sizes, and different surface treatments to fit your exact requirements.

مادةCarbon Steel, Stainless Steel (SS304, SS316), and Brass.
مقاسMetric: M5 – M64 | Imperial: 3/16″ – 2-1/2″ (UNC, UNF, BSW, or custom pitches).
نوع الخيطMetric (M5 – M48) & Imperial (UNC/UNF) options, available in full or partial thread.
Inspection Standard100% Thread Go/No-Go Gauge Testing, Hardness Testing, and Salt Spray Test (up to 1000 Hours available).
FinishingPlain, Zinc Plated (White/Yellow/Black), HDG, Black Oxide, and Geomet.
Grade/StrengthClass 4.8, 8.8, 10.9, 12.9 / Grade 2, 5, 8
الحد الأدنى لكمية الطلبFlexible MOQ for initial custom samples and trial production runs.
موعد التسليمRapid production and fast shipping to reduce your supply chain lead times.

مزايانا

شهادة موثوقة
شهادة معتمدة

حاصلة على شهادة ISO 9001، ISO 45001، ISO 14001، وROHS.

23 عامًا من تصنيع أدوات التثبيت
23 عامًا من التصنيع

من خلال التركيز على تصنيع أدوات التثبيت لمدة 23 عامًا، قمنا ببناء سمعة طيبة في الصناعة ونحن جديرون بثقتك!

الشحن السريع
الشحن السريع

يتم تخزين النماذج القياسية بالكامل ويمكن شحنها بعد فترة وجيزة من تقديم طلبك.

حل التثبيت الشامل
حل التثبيت الشامل

قم بتخصيص حلول التثبيت الشاملة بعناية لتلبية الاحتياجات المتنوعة للعملاء.

شهادات T&Y

حجم الخيطPitchHole SizeGrip Range
م40.7 mm8.00 mm0.40 – 4.75 mm
م50.8 mm9.50 mm0.40 – 4.75 mm
م61.0 mm11.10 mm0.40 – 4.75 mm
م81.25 mm14.30 mm0.40 – 4.75 mm
م101.5 mm17.50 mm0.40 – 4.75 mm
حجم الخيطHole SizeGrip Range
6-32 UNC5/16″ (≈ 7.93 mm)0.015 – 0.187″
8-32 UNC3/8″ (≈ 9.52 mm)0.015 – 0.187″
10-24 UNC3/8″ (≈ 9.52 mm)0.015 – 0.187″
10-32 UNF3/8″ (≈ 9.52 mm)0.015 – 0.187″
1/4-20 UNC7/16″ (≈ 11.13 mm)0.015 – 0.187″
5/16-18 UNC9/16″ (≈ 14.28 mm)0.015 – 0.187″
1/2-13 UNC11/16″ (≈ 17.46 mm)0.015 – 0.187″
تحديث تفضيلات ملفات تعريف الارتباط
arArabic
انتقل إلى الأعلى